| |
[摘要]：One of the major limiting factors in electron beam (e-beam) lithography is the geometric distortion of written features due to electron scattering, which is known as the proximity effect. A conventional approach to the proximity effect correction (PEC) is, through 2D simulation, to determine the dose distribution and/or shape modification for each feature in a circuit pattern such that the written pattern is as close to the target pattern as possible. Earlier, it was shown that the 3D PEC, which considers the variation of exposure along the resist-depth dimension, would be necessary for the feature size well below 100 nm. Also, a feature-by-feature correction procedure is too time-consuming to be practical, especially for the 3D PEC of large-scale patterns. In this paper, a new method for the 3D PEC is proposed, which adopts 3D resist profile (instead of 2D exposure distribution) in optimization, but avoids the intensive computation by employing a critical-location-based correction procedure. The proposed method achieves 3D resist profiles closer to the target ones, compared to 2D PEC. The simulation results show that the proposed method has a potential to provide a practical and effective alternative to the conventional approach. (C) 2011 American Vacuum Society. [DOI: 10.1116/1.3660785] |
|
