[摘要]:This paper presents encouraging results of a novel optoelectronic conversion method for relative displacement. An optical modulator responding to acceleration and gravitation is used for characterization. The Si microelectromechanical system (MEMS) component comprise a spring suspended, in-plane oscillating mass carrying an array of optical apertures. Light flux modulation is achieved with a second array of complementary apertures that is fixed to the Si frame. The investigated device comprises a sandwich structure of an SMD LED, the MEMS aperture gratings, and a phototransistor. Relative displacements of the gratings generate amodulation of the LED light flux that is detected by the phototransistor. Depending on the aperture design, the relative displacement may extend over several tens of microns maintaining a sub-nm resolution. Thus, no closed-loop position control system is required, resulting in minimum complexity and energy consumption of the MEMS component. This setup simplifies the manufacturing process as much as possible, which is one of the significant advantages of the sensor principle. Furthermore, the presented prototype exhibits a promising high sensitivity of 60 nA/nm for displacement, featuring a noise level of about 8 pm/root Hz.