[摘要]：The performance of printable metal back electrodes for polymer solar cells were investigated using light beam induced current (LBIC) mapping of the final solar cell device after preparation to identify the causes of poor performance. Three different types of silver based printable metal inks were employed. Organic solvent based, UV-curable and water based silver inks were tested. Both grid electrodes and full electrodes were employed and it was shown via the grid electrode that the organic solvent based ink adversely affects the device performance under the printed metal whereas both the UV-curable and the water based inks were neutral to improving device performance. Complete roll-to-roll (R2R) processed modules were also tested and some limitations of the LBIC technique was identified for serially connected modules. (C) 2010 Elsevier B.V. All rights reserved.
